TOTEM HSS TAP BIT M12 (FAA0202141)

• Metric hand-tap set for creating internal threads of size M12 × 1.75 mm (coarse metric thread).

• Made from high-speed steel (HSS) for hardness, wear resistance, and durability.

• Includes three taps: taper tap (for starting the thread), intermediate tap (for deepening), and bottoming tap (for finishing threads in blind or through holes).

Uses / Advantages:

• Creates internal threads to fit M12 bolts or screws.

• Suitable for materials like steel, aluminium, brass, and mild steel.

• Can be used for both through-holes and blind-holes.

• Useful in workshops, repairs, maintenance, DIY metalwork, automotive work, and fabrication.

Specifications:

• Thread size: M12 × 1.75 mm.

• Material: High-Speed Steel (HSS).

• Set includes: taper tap, intermediate tap, bottoming tap.

• Recommended pilot drill size before tapping: approximately 10.2 mm.

Limitations / Notes:

• Proper pilot hole is essential; incorrect size can cause thread failure or tap breakage.

• Use cutting fluid or lubricant to reduce heat and improve thread finish.

• Tap straight and avoid excessive force; periodically back off to clear metal shavings.

• When tapping blind holes, use the bottoming tap carefully to avoid damaging the bottom of the hole.